I am trying to come up with a few ideas for Christmas cards for later this year. I posted these 2 on Paper Craft Planet and some of the readers were asking how I did the cut for them. So I thought I'd write up a little tutorial with a few pictures.
Using a two sided card stock, cut at 7 1/4" x 4 1/4"
Then score at 2 3/4" and 3 3/4"
Take a die shape that is symmetric like a circle for example. (I mark the centre line on mine.)
Using a die cut machine, (I use my Big Shot) stack the white platform, first acrylic plate, paper, die. Place the centre of the die on the 2 3/4" score line. Then line the 2nd acrylic plate edge on the centre mark and send it through.
Do not remove the die or paper from the platform. Turn the whole platform around, line the top acrylic plate on the other score line and run it through the machine.
Remove the card. Fold the 2 3/4" forward and the 3 3/4" backward.
There will be score marks on the flip part, but you can cover them with another card shape.
I used a corner rounder and some stamps to complete this card.